0 Items

Taylor Technologies S-1331 Pool Test Strips

Taylor Technologies S-1331 Pool Test Strips include the parameters needed to keep water safe for swimmers (free chlorine, pH, total alkalinity, and cyanuric acid).

$14.00 CAD

SKU: S-1331 Category:

Taylor Technologies S-1331 Pool Test Strips include the parameters needed to keep water safe for swimmers (free chlorine, pH, total alkalinity, and cyanuric acid). Keeping this test strip on hand is a simple way of making sure pool water is maintained between service visits.

Pool Test Strips

  • Free Chlorine 0–10 ppm
  • pH 6.4–8.4
  • Total Alkalinity 0-240 ppm
  • Cyanuric Acid 0-300 ppm
  • 50 strips in shake dispenser bottle: S-1331

For Accurate Test Strip Results

  • Limit exposure to air.
  • Keep strips dry before use.
  • Don’t touch the pads.
  • Collect sample water 18" below the water surface.
  • Don’t flick off excess water.
  • Let correct amount of time elapse for starting and completing the readings.
  • Read test values in the order given.
  • Prevent reagents running between pads by holding strip horizontal to the ground when comparing colors.
  • For best results, test in bright daylight conditions without shadow or glare.
  • Color match salt test strips out of direct sunlight.
  • Don’t use strips past the best by date.

Test Strip Shelf Life

As with all perishables, test strips are sensitive to environmental influences and will last longer under controlled conditions. To this end, we recommend:

  • Storing test strips at a consistent temperature in the range of 36°–85°F (2°–29°C); storing test strips in a refrigerator can prolong the shelf life, but the bottle must be warmed to room temperature before opening to avoid condensation.   
  • Keeping them out of prolonged direct sunlight.
  • Segregating test strips from containers of treatment chemicals.
  • Replacing bottle lids immediately to reduce exposure to air and humidity.

Taylor formulates its test strips to remain effective for two years, the only exception being Salt test strips which last one year. As a general precaution, replace all test strips more than one year old, or at the beginning of a new testing season.